Transparent epoxy resin 750ml

DIPOXY-2K-700 is a transparent, low viscosity epoxy resin. Casting parts can also be cast in silicone molds or carbon, aramid and fiberglass connections are possible.
Component A: 500ml, component B: 250ml.

The solvent-free DIPOXY-2K-700 is mixed in a mixing ratio of 2:1 and is therefore easy to work with. Ideally, components A and B are mixed at a temperature of 10°C to 20°C. Allow approximately 4 to 5 minutes until the two components are well mixed.

Be careful of the risk of burns. As soon as the two components are mixed, a chemical reaction occurs which releases heat. Depending on the amount of mixture in a glass or bucket, heat cannot be carried away quickly enough across the surface.
The rule is therefore always: “better wide and flat than tall and thin”. For example, if you mix 300 ml in a cup about 15 cm high, it will probably, after 15-25 minutes (depending on the outside temperature), be so hot that you can burn yourself and will harden immediately. However, if you fill the same mixture into a bucket and it is only 1 cm high, it will not heat up and you can probably process it in 60 minutes.