FUJI One Glass Ionomer Cement | GC
FUJI One Glass Ionomer Cement | GC is backordered and will ship as soon as it is back in stock.
Delivery and Shipping
Delivery and Shipping
Shipping method:
- France Pickup Point
- Provincial delivery next day before 1 p.m.
- Provincial delivery next day before 6 p.m.
- Paris delivery to office only
- Local delivery - Île-de-France (Inner suburbs)
Local pickup:
Avoid delivery fees for your small orders by picking them up directly at our premises, 10 rue Parmentier, 93100 Montreuil.
Description
Description
The biocompatible, resin-free luting solution that has enjoyed great clinical success for 25 years.
Fuji I, GC's first luting cement, is widely used worldwide.
Shade:
Pale yellow
Packaging:
50 capsules.
Average content per capsule: 0.33 g powder and 0.18 g (0.14 ml) liquid. Minimum net volume of mixed cement per capsule: 0.19 ml.
Instructions for use:
| Powder/liquid ratio (g/g) | 0.33/0.18 |
| Mixing time (seconds) | 10" |
| Working time (minutes, seconds) at 23°C from start of mixing | 2'15" |
| Finishing after (minutes, seconds) after restoration placement | 4'30" |
1. TOOTH PREPARATION
a) Prepare the tooth using common techniques. For pulp capping, use calcium hydroxide.
b) Clean prepared teeth with water and pumice.
c) Rinse thoroughly with water. Remove excess moisture with a cotton pellet or a gentle, oil-free air jet. DO NOT DEHYDRATE. Prepared surfaces should appear moist (glossy).
2. RESTORATION PREPARATION
Ensure the restoration is pre-treated and handled according to the manufacturer's guidelines.
3. CAPSULE ACTIVATION AND MIXING
a) Before activation, shake or tap the capsule on a hard surface to loosen the powder.
b) To activate the capsule, push the plunger until it is flush with the center part and hold it down for 2 seconds.
Note:
i) Ensure the plunger is fully depressed to avoid mixing an inaccurate powder-to-liquid ratio.
ii) The capsule should be activated just before trituration and used immediately.
c) Immediately remove the capsule and place it in the mixer (or amalgamator) and mix for 10 seconds (~4000 rpm).
Note: When using a rotary mixing device, it is recommended not to use the centrifuge option.
4. APPLICATION
a) Immediately remove the mixed capsule from the mixer and place it in the applicator.
b) Press twice to prime the capsule and apply. To adjust the direction of the tip, hold the applicator with the capsule facing you and rotate the capsule body.
c) Extrude the material directly into the restoration.
d) To remove the used capsule, press the release button on the applicator. Twist the capsule and pull.
5. CEMENTATION
a) Coat the internal surface of the restoration with a sufficient amount of cement and seat immediately. The working time is 2 minutes 15 seconds from the start of mixing at 23 °C (73.4 °F). Higher temperatures will shorten the working time.
b) Maintain moderate pressure.
c) Begin removing excess cement when it has a rubbery appearance.
d) Finishing can begin 4 minutes 30 seconds after restoration placement.
STORAGE
For optimal performance, it is recommended to store capsules in their original foil packaging in a cool, dark place (4 to 25 °C) (39.2-77.0 °F).
Payment & Security
Payment Methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
