un scan et c'est dans le panier !
The biocompatible, resin-free sealing solution, which has enjoyed great clinical success for 25 years.
Fuji I, GC's first luting cement, is widely used around the world.
Color:
Pale yellow
Conditioning :
50 capsules.
Average content per capsule: 0.33 g powder and 0.18 g (0.14 ml) liquid. Minimum net volume of cement mixed per capsule: 0.19 ml.
Manual :
| Powder/liquid ratio (g/g) | 0.33/0.18 |
| Mixing time (seconds) | 10" |
| Working time (minutes, seconds) at 23°C from the start of mixing | 2'15" |
| Finishing after (minutes, seconds) after the restoration has set | 4'30" |
1. PREPARATION OF THE TOOTH
a) Prepare the tooth using standard techniques. For pulp capping, use calcium hydroxide.
b) Clean the prepared teeth with water and pumice.
c) Rinse thoroughly with water. Remove excess moisture using a cotton ball or a gentle blast of oil-free air. DO NOT DEHYDRATE. Prepared surfaces should have a wet (shiny) appearance.
2. PREPARATION OF THE RESTORATION
Ensure the restoration is pretreated and handled according to the manufacturer's directions.
3. ACTIVATION AND MIXING OF THE CAPSULE
a) Before activation, shake or tap the capsule on a hard surface to loosen the powder.
b) To activate the capsule, push on the piston until it is flush with the central part and hold it down for 2 seconds.
Note :
i) Ensure the plunger is fully depressed to avoid mixing an inaccurate ratio of powder and liquid.
ii) The capsule should be activated just before mixing and used immediately.
c) Immediately remove the capsule and place it in the blender (or amalgamator) and blend for 10 seconds (~4000 rpm).
Note: If using a rotary mixing device, it is recommended not to use the centrifugal option.
4. APPLICATION
a) Immediately remove the mixed capsule from the blender and place it in the applicator.
b) Press twice to prime the capsule and apply. To adjust the direction of the tip, hold the applicator with the capsule towards you and turn the body of the capsule.
c) Extract the material directly into the restoration.
d) To remove the used capsule, press the release button on the applicator. Twist the capsule and pull.
5. CEMENTING
a) Coat the internal surface of the restoration with a sufficient quantity of cement and place immediately. Working time is 2 minutes 15 seconds from start of mixing at 23°C (73.4°F). Higher temperatures will shorten working time.
b) Maintain moderate pressure.
c) Start removing excess cement when it appears rubbery.
d) Finishing can begin 4 minutes 30 seconds after placement of the restoration.
STORAGE
For optimal performance, it is recommended that capsules be stored in their original foil packaging in a cool, dark place (4-25°C) (39.2-77.0°F).
Similar articles
