Pack Fuji One definitive glass ionomer cement - GC

The biocompatible, resin-free sealing solution that has enjoyed great clinical success for 25 years.
Fuji I, GC's first grouting cement, is widely used worldwide.

Color:
Pale yellow

Packaging:
35g powder, 25g (20ml) liquid, measuring spoon for powder, mixing block. 

Instructions for use:

1. PREPARATION OF THE TOOTH
a) Prepare the tooth in the usual way. For pulp capping, use calcium hydroxide.
b) Clean the prepared teeth with water and pumice.
c) Rinse thoroughly with water.
Gently dry with a cotton ball or air syringe.
DO NOT DEHYDRATE.
Best results are obtained when the surface of the preparation appears moist (shiny).

2. PREPARATION OF RESTORATION
Ensure the restoration is pretreated and handled according to the manufacturer's instructions.

3. DOSAGE OF POWDER AND LIQUID
a) The standard Powder/Liquid ratio is 1.8g/1.0g (1 scoop of powder and 2 drops of liquid).
b) For more accurate dosing, gently tap the powder bottle against your hand. Do not shake or spill.
c) Hold the liquid bottle vertically and press gently.
d) Close the bottles immediately after use.

4. MIXING Place the powder and liquid on the mixing pad. Using a plastic spatula, quickly mix the powder and liquid for 20''.
Note: When mixing larger quantities, divide the powder into two equal parts. Mix the first part with all the liquid for 5 seconds. Add the second part and mix thoroughly for 15 seconds (total 20 seconds).

5. SEALING
a) Coat the internal surface of the restoration with sufficient amount of cement and position immediately. Working time is 2 minutes from start of mixing at 23°C (74°F). Higher temperatures will shorten working time.
b) Maintain moderate pressure.
c) Begin removing excess cement with a scaling instrument when the cement feels rubbery.
d) Finishing can begin 4 minutes 30 seconds after the restoration is placed.

CONSERVATION
Store in a cool, dark place (4-25°C) (39.2-77.0°F). (Expiry: 3 years from date of manufacture)

WARNINGS
1. If contact occurs with oral tissues or skin, remove immediately with an alcohol sponge or cotton pad. Rinse with water. To avoid contact, rubber dam and/or cocoa butter may be used to isolate the surgical site from tissues.
2. In case of contact with eyes, rinse immediately with water and consult a doctor.
3. Do not mix the liquid and powder with any other CVI components.
4. This product is not indicated for fillings or stump reconstructions.